8x Sun Board Complete Diy Kit 672 Leds Samsung Lm561c W/ Bud Boosters Grow Light

WHEN IT COMES TO GROW LIGHTING, THE BEST OPTION AVAILABLE IS STRIPS 1) COVERAGE - make it any size/shape you want/even side lighting is possible 2) CANOPY PENETRATION - more leds spread out gets deeper into canopy 3) VERSATILITY - add on or reconfigure any time you want We at GrowDaddyLEDs.com are committed to helping you set up your grow with the largest and best selection of strips around. With these complete DIY kits using Genuine Samsung lm561c LEDs, all you'll need is a drill, a 1/8" bit, wire strippers, and a phillips screwdriver to build a light up to 18" x 36". LISTING INCLUDES : 6 - Sun Board Strips with 96 Samsung lm561c LEDs in your choice of spectrum 2 - Bud Booster Strips with 48 660nm Deep Red LEDs 8 - 40mm x 450mm heatsinks 2 - pcs 1/2" 18ga aluminum angle in 18", 24", 32" or 36" (choose in Item Length) 30mm double sided Thermal tape pre-applied to boards Meanwell XLG-240-M-AB w/pre-wired dimmer wago style connectors for power and led hookup 3 ft Power cord for driver(6, 10, or 15 footer available) 6 feet of solid core 18ga wire to hook strips up Assorted screws(to build frame) EACH STRIP w/Samsung lm561c : 96 - Samsung lm561c LEDs 24V 48W max 1800mA max (1400mA recommended) 30mm x 400mm each Dual Connectors(easier to wire in series and/or parallel) 2oz RA Copper EACH BUD BOOSTER STRIP : 48 660nm Deep Red LEDs 24V 24W max 900mA max (700mA recommended) 30mm x 400mm each Dual Connectors(easier to wire in series and/or parallel) 2oz RA Copper EXTRUDED ALUMINUM HEATSINKS : 40mm x 450mm x 10mm each Over half a pound each This listing is for 8 strips(6 full spectrum and 2 Bud Booster) with heatsinks to mount them on, aluminum angle(2 each of 18", 24", 32" or 36" length) to build a frame with and everything you need to get them growing, including a Meanwell XLG-240-M-AB driver w/pre-wired dimmer, wago style connectors and power cable. We will pre-apply 30mm double sided thermal conductive tape on the boards for you so all you will need to do is pull the release paper and press them onto your heatsinks for great holding power plus you gain the benefit of transferring the heat to the heatsink much better. All you will need is a drill and 1/8" bit, a good phillips screwdriver, and some wire strippers. These are 30mm x 400mm (approximately 1.2 inch x 16 inches) Sun Board Strips. 6 of the Strips have 96 of the Samsung lm561c diodes with their still awesome 210 lm/w efficiency. 2 of the Strips are Bud Booster Strips with 48 of the 660nm Deep Red LEDs. You also get 8 of the hefty 40mm x 450mm heatsinks. These make it so easy to build a frame for your light as well as keep your strips cooler, thus increasing the efficiency and the life of your strips. The strips have the wire hook-ups on each end of the board making it so much easier and less messy to wire them in series, parallel, or however you need for your project. There are many other driver/strip configurations that work(too many for me to list), but just ask and I can recommend a custom kit for you and I will answer any questions you have or, since we have tons of drivers in stock, we can build you a custom DIY Kit. Check out my other listings for separate listings, different spectrums, mixed sets, sets with heatsinks, blue booster boards, red booster boards, or, if you need a different quantity or custom configuration, just let me know. We always have discreet shipping and this is a private listing, so your purchase will remain anonymous on Pricetronic. What you get is in the description. Some photos may be stock or show other items for reference only. If you have a question, please ask before purchase. IF YOU NEED MORE THAN QUANTITY LISTED, JUST MESSAGE ME AND I WILL INCREASE IT FOR YOU